Adding Performance test script #289

jbusche · 2023-03-17T21:48:59Z

Leaving draft for now and we can discuss/improve next week.

Signed-off-by: James Busche <jbusche@us.ibm.com>

jbusche · 2023-03-22T18:32:15Z

I think it's looking good as a first PR - can make improvements as we go along:

Use:

git clone https://github.com/project-codeflare/multi-cluster-app-dispatcher
cd multi-cluster-app-dispatcher/test/perf-test

./perf.sh 
How many appwrapper jobs do you want?10
jobs number is 10
 
Jobs started at: 11:30:13
 
Submitting job 1
appwrapper.mcad.ibm.com/defaultaw-schd-spec-with-timeout-1 created
Submitting job 2
appwrapper.mcad.ibm.com/defaultaw-schd-spec-with-timeout-2 created
Submitting job 3
appwrapper.mcad.ibm.com/defaultaw-schd-spec-with-timeout-3 created
Submitting job 4
appwrapper.mcad.ibm.com/defaultaw-schd-spec-with-timeout-4 created
Submitting job 5
appwrapper.mcad.ibm.com/defaultaw-schd-spec-with-timeout-5 created
Submitting job 6
appwrapper.mcad.ibm.com/defaultaw-schd-spec-with-timeout-6 created
Submitting job 7
appwrapper.mcad.ibm.com/defaultaw-schd-spec-with-timeout-7 created
Submitting job 8
appwrapper.mcad.ibm.com/defaultaw-schd-spec-with-timeout-8 created
Submitting job 9
appwrapper.mcad.ibm.com/defaultaw-schd-spec-with-timeout-9 created
Submitting job 10
appwrapper.mcad.ibm.com/defaultaw-schd-spec-with-timeout-10 created
No resources found in default namespace.
Number of completed jobs is:  0  and the goal is:  10
No resources found in default namespace.
Number of completed jobs is:  0  and the goal is:  10
Number of completed jobs is:  2  and the goal is:  10
Number of completed jobs is:  5  and the goal is:  10
Number of completed jobs is:  7  and the goal is:  10
Number of completed jobs is:  8  and the goal is:  10
 
All 10 jobs finished: 11:31:18
Total amount of time for 10 appwrappers is: 65 seconds
 
Test results are stored in this file: job-10-11:30:13.log
Do you want to cleanup the most recently created appwrappers? [Y/n]
y
OK, deleting
appwrapper.mcad.ibm.com "defaultaw-schd-spec-with-timeout-1" deleted
appwrapper.mcad.ibm.com "defaultaw-schd-spec-with-timeout-10" deleted
appwrapper.mcad.ibm.com "defaultaw-schd-spec-with-timeout-2" deleted
appwrapper.mcad.ibm.com "defaultaw-schd-spec-with-timeout-3" deleted
appwrapper.mcad.ibm.com "defaultaw-schd-spec-with-timeout-4" deleted
appwrapper.mcad.ibm.com "defaultaw-schd-spec-with-timeout-5" deleted
appwrapper.mcad.ibm.com "defaultaw-schd-spec-with-timeout-6" deleted
appwrapper.mcad.ibm.com "defaultaw-schd-spec-with-timeout-7" deleted
appwrapper.mcad.ibm.com "defaultaw-schd-spec-with-timeout-8" deleted
appwrapper.mcad.ibm.com "defaultaw-schd-spec-with-timeout-9" deleted

test/perf-test/cleanup.sh

test/perf-test/perf.sh

test/perf-test/preempt-exp.yaml

test/perf-test/perf.sh

Signed-off-by: James Busche <jbusche@us.ibm.com>

asm582

We will explore Kuttl later as it involves transforming all ginkgo tests into kuttl. we need an agreement with ODH folks if kuttl is something we can transition.

z103cb

There's a last oc instance in code, once removed this can be merged.

test/perf-test/perf.sh

z103cb · 2023-04-06T06:21:20Z

We will explore Kuttl later as it involves transforming all ginkgo tests into kuttl. we need an agreement with ODH folks if kuttl is something we can transition.

Sound's good. I would consider the conversation closed for this PR. Purposes.

Signed-off-by: James Busche <jbusche@us.ibm.com>

z103cb

LGTM

jbusche · 2023-04-12T18:14:13Z

@asm582. I've been starting to put run data in here: https://ibm.ent.box.com/file/1182185239246

asm582

LGTM 🎉

* update (#298) * Upgraded the golang version Updated travis config for the new version Updated build.sh scripts for the new version * Updates to go.mod Updates to travis.yml, to set dist Added the generated.deepcopy files * Removed unused package. * e2e test script updates * Queue.go updates Other fixes to the makefile and e2e test * Updates to the e2e script Updates to util.go to allow for different images to be used. * Updates to to local host setup * Changes to the run-e2e-kind.sh locally (#290) * Changes to the run-e2e-kind.sh to * Changed out echo server image, small edits * Backed out change in the clean up code. * Updated the makefile to build the executable * Address code review comments. * * Small changes to the e2e script * Build documentation updates. * Documentation updates per code review Fixed errors in the e2e script to load ubuntu:latest image correctly. * Cleaned up false errors Rectified use of undefined variable. * Downgraded go to version 1.18 to allow for use of ubi images. * Downgraded travis ubuntu distro * Added use of docker builder using ubi8 images Makefile updates * Cleaned up the obsolete build scripts Updated documentation Minor changes to makefile * avoid preempt of failed co-schd pods (#317) * Update CONTROLLER_VERSION * Updates to travis and devcontainer * Small updates to the run-e2e test * Updated go-restful dependency * More go.mod updates debug messages for the e2e script. * Added back in the removal of taints from head node Cleanup of junk files. * Remove whitesapce * Small corrections. * Refactoring of env-setup * moe arch issues with the kuttl binnary * Updated the go version in go.mod (#316) * Updated the go version in go.mod Ran `go mod tidy` Updated travis.yml Deleted staled code, disabled the quota manager in the controller. * Added travis changes. * Removed linter install Ported changes to .travis.yml from quota-management-branch * Removed linter install Ported changes to .travis.yml from quota-management-branch * Downgraded go to version 1.18 to allow for use of ubi images. * Added use of docker builder using ubi8 images Makefile updates * Cleaned up the obsolete build scripts Updated documentation Minor changes to makefile * Small fix to the docker file. * More updates to go.mod to fix vulnerabilities * Removed text files. * Yet another text file removal * Small fix to address PR review comments. * Create 1.29.57 release Signed-off-by: Anish Asthana <anishasthana1@gmail.com> * Adding Performance test script (#289) * Adding Performance test script Signed-off-by: James Busche <jbusche@us.ibm.com> * red hat image and more checking Signed-off-by: James Busche <jbusche@us.ibm.com> * Check for mcad install Signed-off-by: James Busche <jbusche@us.ibm.com> * remove oc and formatting Signed-off-by: James Busche <jbusche@us.ibm.com> * fix to run from any namespace Signed-off-by: James Busche <jbusche@us.ibm.com> --------- Signed-off-by: James Busche <jbusche@us.ibm.com> * fix typo (#326) * Document updates. * remove invalid characters from branch name an replace with - (#328) Signed-off-by: Kevin <kpostlet@redhat.com> * Bump golang.org/x/text from 0.3.4 to 0.3.8 (#321) Bumps [golang.org/x/text](https://github.com/golang/text) from 0.3.4 to 0.3.8. - [Release notes](https://github.com/golang/text/releases) - [Commits](golang/text@v0.3.4...v0.3.8) --- updated-dependencies: - dependency-name: golang.org/x/text dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Bump golang.org/x/net from 0.0.0-20210405180319-a5a99cb37ef4 to 0.7.0 (#324) Bumps [golang.org/x/net](https://github.com/golang/net) from 0.0.0-20210405180319-a5a99cb37ef4 to 0.7.0. - [Release notes](https://github.com/golang/net/releases) - [Commits](https://github.com/golang/net/commits/v0.7.0) --- updated-dependencies: - dependency-name: golang.org/x/net dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Bump github.com/gogo/protobuf from 1.3.1 to 1.3.2 (#323) Bumps [github.com/gogo/protobuf](https://github.com/gogo/protobuf) from 1.3.1 to 1.3.2. - [Release notes](https://github.com/gogo/protobuf/releases) - [Commits](gogo/protobuf@v1.3.1...v1.3.2) --- updated-dependencies: - dependency-name: github.com/gogo/protobuf dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Added .devcontainer to gitignore Removed directory from commit. * Codereview comments. * Bump golang.org/x/crypto from 0.0.0-20201002170205-7f63de1d35b0 to 0.1.0 (#322) Bumps [golang.org/x/crypto](https://github.com/golang/crypto) from 0.0.0-20201002170205-7f63de1d35b0 to 0.1.0. - [Release notes](https://github.com/golang/crypto/releases) - [Commits](https://github.com/golang/crypto/commits/v0.1.0) --- updated-dependencies: - dependency-name: golang.org/x/crypto dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Fixes to the setup part of the script. * change schedSpec to schedulingSpec and note M1 image for echo server in tutorial (#333) Signed-off-by: Sunyanan Choochotkaew <sunyanan.choochotkaew1@ibm.com> * Changes user to 1000 (#329) * non-root 1000 user Signed-off-by: James Busche <jbusche@us.ibm.com> * cleanup dockerfile Signed-off-by: James Busche <jbusche@us.ibm.com> * moving curl into builder Signed-off-by: James Busche <jbusche@us.ibm.com> --------- Signed-off-by: James Busche <jbusche@us.ibm.com> * Address race condition in XController variable (#330) * Update Dockerfile: * To not to use root user to build * To allow for passing of golang build args Updated Makefile: * To selectively run the generate code * To allow for passing of golang build args * Updates to ensure that docker builds flags are used Update to the e2e script to allow for not caching test runs and cluster setup * Updates to e2e script and travis for log level Fixed 1 race condition issue. * Reverted needless changes. * Documentation updates. Minor fixes to make file. * Fixed bug in docker file Reduced noise in e2e test. * Fixed potential regression. * Added back Dockerfile * Fix bad merge. --------- Signed-off-by: Anish Asthana <anishasthana1@gmail.com> Signed-off-by: James Busche <jbusche@us.ibm.com> Signed-off-by: Kevin <kpostlet@redhat.com> Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: Sunyanan Choochotkaew <sunyanan.choochotkaew1@ibm.com> Co-authored-by: Kai-Hsun Chen <kaihsun@apache.org> Co-authored-by: Abhishek Malvankar <asm582@users.noreply.github.com> Co-authored-by: Mustafa Eyceoz <maxusmusti@gmail.com> Co-authored-by: Anish Asthana <anishasthana1@gmail.com> Co-authored-by: James Busche <101845348+jbusche@users.noreply.github.com> Co-authored-by: Lionel Villard <villard@us.ibm.com> Co-authored-by: Kevin Postlethwait <k.postlethwait24@gmail.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Sunyanan Choochotkaew <sunya-ch@ist.osaka-u.ac.jp>

* Move POC rest impl. to quota plubins. * Initial checkin of new quota management. * Partial update to e2e script to enable instatiate 2 differently configured mcad controllers. * Added kuttl installation to e2e test. * Synced version file. * Modified kuttl installation to include sudo for commands. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added startup of MCAD with Quota Management enabled Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added kuttl test command to e2e testing. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Provided an alternative to the travis_wait command. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added full e2e testing back. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added explicit kuttl config file. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Set e2e test to above if kuttl test fails. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Uptick of release number. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Fix syntax error. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added creation of test namespace to kuttl testing steps. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test kuttl failure in Travis run. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test fix to make e2e test failure in background mode. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test fix to make e2e test failure in background mode. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test fix to make e2e test kuttle success run in background mode. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Fix job names to match file names and increased timeout for preemption to happen. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Increase kuttle timeout. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test fix to make e2e test failure in background mode. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test fix to make e2e test failure in background mode. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test fix to make e2e test kuttle success run in background mode. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Use different color code for e2e PID message. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Debugging kuttl failure. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Rearrange setup of kuttl test for more stability of test. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Introduced forced error test to validate new Travis workaround for long running Travis job. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Force final failure test for e2e kuttl test. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Removed forced failure for Travis testing. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added delay step 3 to give time for MCAD to process subtrees. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Updated QM test to use Helm3 Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Quota management porting of initial codebase (#269) * Move POC rest impl. to quota plubins. * Initial checkin of new quota management. * Partial update to e2e script to enable instatiate 2 differently configured mcad controllers. * Added kuttl installation to e2e test. * Synced version file. * Modified kuttl installation to include sudo for commands. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added startup of MCAD with Quota Management enabled Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added kuttl test command to e2e testing. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Provided an alternative to the travis_wait command. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added full e2e testing back. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added explicit kuttl config file. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Set e2e test to above if kuttl test fails. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Uptick of release number. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Fix syntax error. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added creation of test namespace to kuttl testing steps. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test kuttl failure in Travis run. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test fix to make e2e test failure in background mode. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test fix to make e2e test failure in background mode. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test fix to make e2e test kuttle success run in background mode. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Fix job names to match file names and increased timeout for preemption to happen. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Increase kuttle timeout. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test fix to make e2e test failure in background mode. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test fix to make e2e test failure in background mode. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Test fix to make e2e test kuttle success run in background mode. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Use different color code for e2e PID message. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Debugging kuttl failure. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Rearrange setup of kuttl test for more stability of test. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Introduced forced error test to validate new Travis workaround for long running Travis job. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Force final failure test for e2e kuttl test. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Removed forced failure for Travis testing. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added delay step 3 to give time for MCAD to process subtrees. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Updated QM test to use Helm3 Signed-off-by: dmatch01 <darroyo@us.ibm.com> --------- Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Added the new path QM test using new Helm3 setup. Signed-off-by: dmatch01 <darroyo@us.ibm.com> * Upgrade the golang version for the quota-management branch. (#313) * update (#298) * Upgraded the golang version Updated travis config for the new version Updated build.sh scripts for the new version * Updates to go.mod Updates to travis.yml, to set dist Added the generated.deepcopy files * Removed unused package. * e2e test script updates * Queue.go updates Other fixes to the makefile and e2e test * Updates to the e2e script Updates to util.go to allow for different images to be used. * Updates to to local host setup * Changes to the run-e2e-kind.sh locally (#290) * Changes to the run-e2e-kind.sh to * Changed out echo server image, small edits * Backed out change in the clean up code. * Updated the makefile to build the executable * Address code review comments. * * Small changes to the e2e script * Build documentation updates. * Documentation updates per code review Fixed errors in the e2e script to load ubuntu:latest image correctly. * Cleaned up false errors Rectified use of undefined variable. * Downgraded go to version 1.18 to allow for use of ubi images. * Downgraded travis ubuntu distro * Added use of docker builder using ubi8 images Makefile updates * Cleaned up the obsolete build scripts Updated documentation Minor changes to makefile * avoid preempt of failed co-schd pods (#317) * Update CONTROLLER_VERSION * Updates to travis and devcontainer * Small updates to the run-e2e test * Updated go-restful dependency * More go.mod updates debug messages for the e2e script. * Added back in the removal of taints from head node Cleanup of junk files. * Remove whitesapce * Small corrections. * Refactoring of env-setup * moe arch issues with the kuttl binnary * Updated the go version in go.mod (#316) * Updated the go version in go.mod Ran `go mod tidy` Updated travis.yml Deleted staled code, disabled the quota manager in the controller. * Added travis changes. * Removed linter install Ported changes to .travis.yml from quota-management-branch * Removed linter install Ported changes to .travis.yml from quota-management-branch * Downgraded go to version 1.18 to allow for use of ubi images. * Added use of docker builder using ubi8 images Makefile updates * Cleaned up the obsolete build scripts Updated documentation Minor changes to makefile * Small fix to the docker file. * More updates to go.mod to fix vulnerabilities * Removed text files. * Yet another text file removal * Small fix to address PR review comments. * Create 1.29.57 release Signed-off-by: Anish Asthana <anishasthana1@gmail.com> * Adding Performance test script (#289) * Adding Performance test script Signed-off-by: James Busche <jbusche@us.ibm.com> * red hat image and more checking Signed-off-by: James Busche <jbusche@us.ibm.com> * Check for mcad install Signed-off-by: James Busche <jbusche@us.ibm.com> * remove oc and formatting Signed-off-by: James Busche <jbusche@us.ibm.com> * fix to run from any namespace Signed-off-by: James Busche <jbusche@us.ibm.com> --------- Signed-off-by: James Busche <jbusche@us.ibm.com> * fix typo (#326) * Document updates. * remove invalid characters from branch name an replace with - (#328) Signed-off-by: Kevin <kpostlet@redhat.com> * Bump golang.org/x/text from 0.3.4 to 0.3.8 (#321) Bumps [golang.org/x/text](https://github.com/golang/text) from 0.3.4 to 0.3.8. - [Release notes](https://github.com/golang/text/releases) - [Commits](golang/text@v0.3.4...v0.3.8) --- updated-dependencies: - dependency-name: golang.org/x/text dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Bump golang.org/x/net from 0.0.0-20210405180319-a5a99cb37ef4 to 0.7.0 (#324) Bumps [golang.org/x/net](https://github.com/golang/net) from 0.0.0-20210405180319-a5a99cb37ef4 to 0.7.0. - [Release notes](https://github.com/golang/net/releases) - [Commits](https://github.com/golang/net/commits/v0.7.0) --- updated-dependencies: - dependency-name: golang.org/x/net dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Bump github.com/gogo/protobuf from 1.3.1 to 1.3.2 (#323) Bumps [github.com/gogo/protobuf](https://github.com/gogo/protobuf) from 1.3.1 to 1.3.2. - [Release notes](https://github.com/gogo/protobuf/releases) - [Commits](gogo/protobuf@v1.3.1...v1.3.2) --- updated-dependencies: - dependency-name: github.com/gogo/protobuf dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Added .devcontainer to gitignore Removed directory from commit. * Codereview comments. * Bump golang.org/x/crypto from 0.0.0-20201002170205-7f63de1d35b0 to 0.1.0 (#322) Bumps [golang.org/x/crypto](https://github.com/golang/crypto) from 0.0.0-20201002170205-7f63de1d35b0 to 0.1.0. - [Release notes](https://github.com/golang/crypto/releases) - [Commits](https://github.com/golang/crypto/commits/v0.1.0) --- updated-dependencies: - dependency-name: golang.org/x/crypto dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Fixes to the setup part of the script. * change schedSpec to schedulingSpec and note M1 image for echo server in tutorial (#333) Signed-off-by: Sunyanan Choochotkaew <sunyanan.choochotkaew1@ibm.com> * Changes user to 1000 (#329) * non-root 1000 user Signed-off-by: James Busche <jbusche@us.ibm.com> * cleanup dockerfile Signed-off-by: James Busche <jbusche@us.ibm.com> * moving curl into builder Signed-off-by: James Busche <jbusche@us.ibm.com> --------- Signed-off-by: James Busche <jbusche@us.ibm.com> * Address race condition in XController variable (#330) * Update Dockerfile: * To not to use root user to build * To allow for passing of golang build args Updated Makefile: * To selectively run the generate code * To allow for passing of golang build args * Updates to ensure that docker builds flags are used Update to the e2e script to allow for not caching test runs and cluster setup * Updates to e2e script and travis for log level Fixed 1 race condition issue. * Reverted needless changes. * Documentation updates. Minor fixes to make file. * Fixed bug in docker file Reduced noise in e2e test. * Fixed potential regression. * Added back Dockerfile * Fix bad merge. --------- Signed-off-by: Anish Asthana <anishasthana1@gmail.com> Signed-off-by: James Busche <jbusche@us.ibm.com> Signed-off-by: Kevin <kpostlet@redhat.com> Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: Sunyanan Choochotkaew <sunyanan.choochotkaew1@ibm.com> Co-authored-by: Kai-Hsun Chen <kaihsun@apache.org> Co-authored-by: Abhishek Malvankar <asm582@users.noreply.github.com> Co-authored-by: Mustafa Eyceoz <maxusmusti@gmail.com> Co-authored-by: Anish Asthana <anishasthana1@gmail.com> Co-authored-by: James Busche <101845348+jbusche@users.noreply.github.com> Co-authored-by: Lionel Villard <villard@us.ibm.com> Co-authored-by: Kevin Postlethwait <k.postlethwait24@gmail.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Sunyanan Choochotkaew <sunya-ch@ist.osaka-u.ac.jp> --------- Signed-off-by: dmatch01 <darroyo@us.ibm.com> Signed-off-by: Anish Asthana <anishasthana1@gmail.com> Signed-off-by: James Busche <jbusche@us.ibm.com> Signed-off-by: Kevin <kpostlet@redhat.com> Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: Sunyanan Choochotkaew <sunyanan.choochotkaew1@ibm.com> Co-authored-by: dmatch01 <darroyo@us.ibm.com> Co-authored-by: dmatch01 <dmatch01@users.noreply.github.com> Co-authored-by: Laurentiu Bradin <109964136+z103cb@users.noreply.github.com> Co-authored-by: Kai-Hsun Chen <kaihsun@apache.org> Co-authored-by: Mustafa Eyceoz <maxusmusti@gmail.com> Co-authored-by: Anish Asthana <anishasthana1@gmail.com> Co-authored-by: James Busche <101845348+jbusche@users.noreply.github.com> Co-authored-by: Lionel Villard <villard@us.ibm.com> Co-authored-by: Kevin Postlethwait <k.postlethwait24@gmail.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Sunyanan Choochotkaew <sunya-ch@ist.osaka-u.ac.jp>

Adding Performance test script

31838a0

Signed-off-by: James Busche <jbusche@us.ibm.com>

jbusche marked this pull request as ready for review March 22, 2023 18:32

z103cb reviewed Mar 29, 2023

View reviewed changes

test/perf-test/cleanup.sh Show resolved Hide resolved

test/perf-test/perf.sh Show resolved Hide resolved

test/perf-test/preempt-exp.yaml Outdated Show resolved Hide resolved

test/perf-test/perf.sh Show resolved Hide resolved

z103cb reviewed Mar 30, 2023

View reviewed changes

test/perf-test/perf.sh Show resolved Hide resolved

test/perf-test/perf.sh Outdated Show resolved Hide resolved

test/perf-test/perf.sh Outdated Show resolved Hide resolved

jbusche added 2 commits March 30, 2023 13:08

red hat image and more checking

36016c6

Signed-off-by: James Busche <jbusche@us.ibm.com>

Check for mcad install

29e1903

Signed-off-by: James Busche <jbusche@us.ibm.com>

asm582 previously approved these changes Apr 4, 2023

View reviewed changes

z103cb reviewed Apr 6, 2023

View reviewed changes

test/perf-test/perf.sh Outdated Show resolved Hide resolved

test/perf-test/perf.sh Outdated Show resolved Hide resolved

remove oc and formatting

a1a4dbd

Signed-off-by: James Busche <jbusche@us.ibm.com>

jbusche dismissed asm582’s stale review via a1a4dbd April 6, 2023 15:57

fix to run from any namespace

f8f9cb4

Signed-off-by: James Busche <jbusche@us.ibm.com>

z103cb approved these changes Apr 7, 2023

View reviewed changes

asm582 approved these changes Apr 18, 2023

View reviewed changes

asm582 merged commit 996e700 into project-codeflare:main Apr 18, 2023

jbusche deleted the add-perf-test branch April 18, 2023 15:07

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Adding Performance test script #289

Adding Performance test script #289

Uh oh!

jbusche commented Mar 17, 2023

Uh oh!

jbusche commented Mar 22, 2023

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

asm582 left a comment

Uh oh!

z103cb left a comment

Uh oh!

Uh oh!

Uh oh!

z103cb commented Apr 6, 2023

Uh oh!

z103cb left a comment

Uh oh!

jbusche commented Apr 12, 2023

Uh oh!

asm582 left a comment

Uh oh!

Uh oh!

Adding Performance test script #289

Adding Performance test script #289

Uh oh!

Conversation

jbusche commented Mar 17, 2023

Uh oh!

jbusche commented Mar 22, 2023

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

asm582 left a comment

Choose a reason for hiding this comment

Uh oh!

z103cb left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Uh oh!

z103cb commented Apr 6, 2023

Uh oh!

z103cb left a comment

Choose a reason for hiding this comment

Uh oh!

jbusche commented Apr 12, 2023

Uh oh!

asm582 left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!